Docker Tutorial is a series of blogs that will give you the conceptual & practical exposure to Docker – A new age containerization technology.

In this blog, I will focus on the below topics:

  • What is the necessity behind Docker
  • Introduction to Docker
  • Virtualization vs Containerization

Docker’s gaining popularity and its usage is spreading like wildfire. The reason for Docker’s growing popularity is the extent to which it can be used in an IT organization. Very few tools out there have the functionality to find itself useful to both developers and as well as system administrators. Docker is one such tool that truly lives up to its promise of Build, Ship and Run.

In simple words, Docker is a software containerization platform, meaning you can build your application, package them along with their dependencies into a container and then these containers can be easily shipped to run on other machines.

For example: Lets consider a linux based application which has been written both in Ruby and Python. This application requires a specific version of linux, Ruby and Python. In order to avoid any version conflicts on user’s end, a linux docker container can be  created with the required versions of Ruby and Python installed along with the application. Now the end users can use the application easily by running this container without worrying about the dependencies or any version conflicts.

These containers uses Containerization which can be considered as an evolved version of Virtualization. The same task can also be achieved using Virtual Machines, however it is not very efficient.

I generally receive a question at this point, i.e. what is the difference between Virtualization and Containerization? These two terms are very similar to each other. So, let me first tell you What is Virtualization?

What is Virtualization?

Virtualization is the technique of importing a Guest operating system on top of a Host operating system. This technique was a revelation at the beginning because it allowed developers to run multiple operating systems in different virtual machines all running on the same host. This eliminated the need for extra hardware resource. The advantages of Virtual Machines or Virtualization are:

  • Multiple operating systems can run on the same machine
  • Maintenance and Recovery were easy in case of failure conditions
  • Total cost of ownership was also less due to the reduced need for infrastructure

Virtual Machine Architecture - Docker Tutorial On Introduction To Docker - Edureka

In the diagram on the right, you can see there is a host operating system on which there are 3 guest operating systems running which is nothing but the virtual machines.

As you know nothing is perfect, Virtualization also has some shortcomings. Running multiple Virtual Machines in the same host operating system leads to performance degradation. This is because of the guest OS running on top of the host OS, which will have its own kernel and set of libraries and dependencies. This takes up a large chunk of system resources, i.e. hard disk, processor and especially RAM.

Another problem with Virtual Machines which uses virtualization is that it takes almost a minute to boot-up.This is very critical in case of real-time applications.

Following are the disadvantages of Virtualization:

  • Running multiple Virtual Machines leads to unstable performance
  • Hypervisors are not as efficient as the host operating system
  • Boot up process is long and takes time

These drawbacks led to the emergence of a new technique called Containerization. Now let me tell you about Containerization.

What is Containerization?

Containerization is the technique of bringing virtualization to the operating system level. While Virtualization brings abstraction to the hardware, Containerization brings abstraction to the operating system. Do note that Containerization is also a type of Virtualization. Containerization is however more efficient because there is no guest OS here and utilizes a host’s operating system, share relevant libraries & resources as and when needed unlike virtual machines. Application specific binaries and libraries of containers run on the host kernel, which makes processing and execution very fast. Even booting-up a container takes only a fraction of a second. Because all the containers share, host operating system and holds only the application related binaries & libraries. They are lightweight and faster than Virtual Machines.

Advantages of Containerization over Virtualization are:

  • Containers on the same OS kernel are lighter and smaller
  • Better resource utilization compared to VMs
  • Boot-up process is short and takes few seconds

Container Architecture - Docker Tutorial On Introduction To Docker - Edureka

In the diagram on the right, you can see that there is a host operating system which is shared by all the containers. Containers only contain application specific libraries which are separate for each container and they are faster and do not waste any resources.

All these containers are handled by the containerization layer which is not native to the host operating system. Hence a software is needed, which can enable you to create & run containers on your host operating system.

Check out this Docker tutorial video for deep understanding of Docker.

Docker Tutorial for Beginners – Part 1 | What is Docker? | Docker Training | DevOps Tools | Edureka

This is where Docker comes in. Now I will quickly take you through the introduction to Docker.

Docker Tutorial – Introduction To Docker 

Docker is a containerization platform that packages your application and all its dependencies together in the form of Containers to ensure that your application works seamlessly in any environment.

Container Apps Using Docker Engine - Docker Tutorial On Introduction To Docker - Edureka

As you can see in the diagram on the right, each application will run on a separate container and will have its own set of libraries and dependencies. This also ensures that there is process level isolation, meaning each application is independent of other applications, giving developers surety that they can build applications that will not interfere with one another.

As a developer, I can build a container which has different applications installed on it and give it to my QA team who will only need to run the container to replicate the developer environment.



So, how does this really help?

Now the QA team need not install all the dependent software and applications to test the code and this helps them save lots of time and energy. This also ensures that the working environment is consistent across all the individuals involved in the process, starting from development to deployment. The number of systems can be scaled up easily and the code can be deployed on them effortlessly.

With this we come to an end to Docker Tutorial’s first blog on Introduction To Docker & Containerization.


What is Docker & Docker Container ?

What is Docker ? – Docker is a containerization platform that packages your application and all its dependencies together in the form of a docker container to ensure that your application works seamlessly in any environment.

What is Container ? – Docker Container is a standardized unit which can be created on the fly to deploy a particular application or environment. It could be an Ubuntu container, CentOs container, etc. to full-fill the requirement from an operating system point of view. Also, it could be an application oriented container like CakePHP container or a Tomcat-Ubuntu container etc.

Let’s understand it with an example:

A company needs to develop a Java Application. In order to do so the developer will setup an environment with tomcat server installed in it. Once the application is developed, it needs to be tested by the tester. Now the tester will again set up tomcat environment from the scratch to test the application. Once the application testing is done, it will be deployed on the production server. Again the production needs an environment with tomcat installed on it, so that it can host the Java application. If you see the same tomcat environment setup is done thrice. There are some issues that I have listed below with this approach:

1) There is a loss of time and effort.

2) There could be a version mismatch in different setups i.e. the developer & tester may have installed tomcat 7, however the system admin installed tomcat 9 on the production server.

Now, I will show you how Docker container can be used to prevent this loss.

In this case, the developer will create a tomcat docker image ( A Docker Image is nothing but a blueprint to deploy multiple containers of the same configurations ) using a base image like Ubuntu, which is already existing in Docker Hub (Docker Hub has some base docker images available for free) . Now this image can be used by the developer, the tester and the system admin to deploy the tomcat environment. This is how docker container solves the problem.

I hope you are now clear on What is Docker & Docker Container. In case you have any further doubts, please feel to leave a comment, I will be glad to help you.

However, now you would think that this can be done using Virtual Machines as well. However, there is catch if you choose to use virtual machine. Let’s see a comparison between a Virtual machine and Docker Container to understand this better.

VM vs Docker - What Is Docker Container - Edureka

Let me take you through the above diagram. Virtual Machine and Docker Container are compared on the following three parameters:

  • Size – This parameter will compare Virtual Machine & Docker Container on their resource they utilize.
  • Startup – This parameter will compare on the basis of their boot time.
  • Integration – This parameter will compare on their ability to integrate with other tools with ease.

I will follow the above order in which parameters are listed. So first parameter would be “Size”.


The following image explains how Virtual Machine and Docker Container utilizes the resources allocated to them.

Virtual Machine vs Docker Example - What Is Docker Container - Edureka

Consider a situation depicted in the above image.  I have a host system with 16 Gigabytes of RAM and I have to run 3 Virtual Machines on it. To run the Virtual Machines in parallel, I need to divide my RAM among the Virtual Machines. Suppose I allocate it in the following way:

  • 6 GB of RAM to my first VM,
  • 4 GB of RAM to my second VM, and
  • 6 GB to my third VM.

In this case, I will not be left with anymore RAM even though the usage is:

  • My first VM uses only 4 GB of RAM – Allotted 6 GB2 GB Unused & Blocked
  • My second VM uses only 3 GB of RAM – Allotted 4 GB1 GB Unused & Blocked
  • My third VM uses only 2 GB of RAM – Allotted 6 GB4 GB Unused & Blocked

This is because once a chunk of memory is allocated to a Virtual Machine, then that memory is blocked and cannot be re-allocated. I will be wasting 7 GB (2 GB + 1 GB + 4 GB) of RAM in total and thus cannot setup a new Virtual Machine. This is a major issue because RAM is a costly hardware.

So, how can I avoid this problem?

If I use Docker, my CPU will allocates exactly the amount of memory that is required by the Docker Container.

  • My first container will use only 4 GB of RAM – Allotted 4 GB0 GB Unused & Blocked
  • My second container will use only 3 GB of of RAM – Allotted 3 GB0 GB Unused & Blocked
  • My third container will use only 2 GB of RAM – Allotted 2 GB0 GB Unused & Blocked

Since there is no allocated memory (RAM) which is unused, I save 7 GB (16 4 – 3 – 2) of RAM by using Docker Container. I can even create additional containers from the leftover RAM and increase my productivity.

So here Docker Container clearly wins over Virtual machine as I can efficiently use my resources as per my need.

Check out this video to know more about Docker.

Docker Tutorial For Beginners | Docker Training | DevOps Tools | Edureka


Comparing VM Startup vs Container Startup - What Is Docker Container - Edureka

When it comes to start-up, Virtual Machine takes a lot of time to boot up because the guest operating system needs to start from scratch, which will then load all the binaries and libraries. This is time consuming and will prove very costly at times when quick startup of applications is needed. In case of Docker Container, since the container runs on your host OS, you can save precious boot-up time. This is a clear advantage over Virtual Machine.

Consider a situation where I want to install two different versions of Ruby on my system. If I use Virtual Machine, I will need to set up 2 different Virtual Machines to run the different versions. Each of these will have its own set of binaries and libraries while running on different guest operating systems. Whereas if I use Docker Container, even though I will be creating 2 different containers where each container will have its own set of binaries and libraries, I will be running them on my host operating system. Running them straight on my Host operating system makes my Docker Containers lightweight and faster.

So Docker Container clearly wins again from Virtual Machine based on Startup parameter.

Now, finally let us consider the final parameter, i.e. Integration.

What about Integration?

Integration of different tools using Virtual Machine maybe possible, but even that possibility comes with a lot of complications.

Docker Integrations - What is Docker Container - Edureka

I can have only a limited number of DevOps tools running in a Virtual Machine. As you can see in the image above, If I want many instances of Jenkins and Puppet, then I would need to spin up many Virtual Machines because each can have only one running instance of these tools. Setting up each VM brings with it, infrastructure problems. I will have the same problem if I decide to setup multiple instances of Ansible, Nagios, Selenium and Git. It will also be a hectic task to configure these tools in every VM.

This is where Docker comes to the rescue. Using Docker Container, we can set up many instances of Jenkins, Puppet, and many more, all running in the same container or running in different containers which can interact with one another by just running a few commands. I can also easily scale up by creating multiple copies of these containers. So configuring them will not be a problem.

Docker Integrations - What Is Docker Container - Edureka

To sum up, it won’t be an understatement to say that Docker is a more sensible option when compared to Virtual Machines.

Docker is designed to benefit both Developers and System Administrators, making it a part of many DevOps toolchains. Developers can write their code without worrying about the testing or the production environment and system administrators need not worry about infrastructure as Docker can easily scale up and scale down the number of systems for deploying on the servers.

What is Docker Engine?

Now I will take you through Docker Engine which is the heart of the Docker system.

Docker Engine is simply the docker application that is installed on your host machine. It works like a client-server application which uses:

  • server which is a type of long-running program called a daemon process
  • A command line interface (CLI) client
  • REST API is used for communication between the CLI client and Docker Daemon

Docker Client - What Is Docker Container - Edureka

As per the above image, in a Linux Operating system, there is a Docker client which can be accessed from the terminal and a Docker Host which runs the Docker Daemon. We build our Docker images and run Docker containers by passing commands from the CLI client to the Docker Daemon.
However, in case of Windows/Mac there is an additional Docker Toolbox component inside the Docker host. This Docker Toolbox is an installer to quickly and easily install and setup a Docker environment on your Windows/iOS. Docker Toolbox installs Docker Client, Machine, Compose (Mac only), Kitematic and VirtualBox.

Let’s now understand three important terms, i.e. Docker Images, Docker Containers and Docker Registry.

What is Docker Image?

Docker Image can be compared to a template which is used to create Docker Containers. They are the building blocks of a Docker Container. These Docker Images are created using the build command. These Read only templates are used for creating containers by using the run command. We will explore Docker commands in depth in the “Docker Commands blog”.


Docker Run Command - What Is Docker Container - Edureka

Docker lets people (or companies) create and share software through Docker images. Also, you don’t have to worry about whether your computer can run the software in a Docker image — a Docker container can always run it.

I can either use a ready-made docker image from docker-hub or create a new image as per my requirement. In the Docker Commands blog we will see how to create your own image.

What is Docker Container?

Containers are the ready applications created from Docker Images or you can say a Docker Container is a running instance of a Docker Image and they hold the entire package needed to run the application. This happens to be the ultimate utility of Docker.


Creating Docker Containers using Docker Images - What Is Docker Container - Edureka

What is Docker Registry?

Finally, Docker Registry is where the Docker Images are stored. The Registry can be either a user’s local repository or a public repository like a Docker Hub allowing multiple users to collaborate in building an application. Even with multiple teams within the same organization can exchange or share containers by uploading them to the Docker Hub. Docker Hub is Docker’s very own cloud repository similar to GitHub.

What is Docker Architecture?

Docker Architecture includes a Docker client – used to trigger Docker commands, a Docker Host – running the Docker Daemon and a Docker Registry – storing Docker Images. The Docker Daemon running within Docker Host is responsible for the images and containers.

Docker Architecture - What Is Docker Container - Edureka

  • To build a Docker Image, we can use the CLI (client) to issue a build command to the Docker Daemon (running on Docker_Host). The Docker Daemon will then build an image based on our inputs and save it in the Registry, which can be either Docker hub or a local repository
  • If we do not want to create an image, then we can just pull an image from the Docker hub, which would have been built by a different user
  • Finally, if we have to create a running instance of my Docker image, we can issue a run command from the CLI, which will create a Docker Container.

This is the simple functionality of Docker :).
  1. No comments yet.
  1. No trackbacks yet.

Thanks for your comment

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: